0Articolo/i

Non hai articoli nel carrello.

Product was successfully added to your shopping cart.
RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-21

RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM

(Non disponibile)

Nuovo
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01
  • RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01 RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM W5859 RM 028-01

Richard Mille

RICHARD MILLE RM 028 TITANIUM RUBBER NEW 47MM

INTRODUCTION
DEVELOPMENT GUIDED BY EXTREME SUBMARINE CONDITIONS
We created the RM 025 because we wanted to tackle the circle in all its roundness, and its creation supplied us with the technical foundation for developing the automatic movement of the RM 028. Cased in a slightly smaller diameter of 47 mm, this creation has all the hallmarks of its uncompromising character.

Following the direction set out by the first diver’s watch created by Richard Mille, the RM 025, the RM 028 uses a number of key elements that demarcate the theme of diving within the collection. Its exceptional tripartite case with a unidirectional bezel and water resistance to 300 metres follows ISO diver’s watch norm 6425, creating a perfect environment to house the skeletonised movement with variable rotor geometry, a Richard Mille exclusive.

IMMERSION

We created the RM 025 because we wanted to tackle the circle in all its roundness, and its creation supplied us with the technical foundation for developing the automatic movement of the RM 028

RM 028 AUTOMATIC WINDING DIVER'S WATCH

CALIBRE RMAS7
Automatic winding movement with hours, minutes, central seconds, date and variable-geometry rotor.

POWER RESERVE
Circa 55 hours (± 10%).

BASEPLATE AND BRIDGES MADE OF GRADE 5 TITANIUM
Production of these components in grade 5 titanium with black PVD or Titalyt® coating confers great rigidity to the entire assembly, as well as precise the surface flatness essential for perfect functioning of the gear train.

The baseplate and bridges were subjected to separate and extensive validation tests to ensure it met optimal strength requirements.

DATE DISPLAY
Semi-instantaneous, the calendar disc of sapphire crystal is treated with non-reflective coating on both sides.

VARIABLE-GEOMETRY ROTOR

The Richard Mille RM 028 uses variable geometry to optimise the rotor’s winding motion.

Rotor specifications
• Arm in grade 5 titanium
• High palladium content 18K white gold weight segments
• Weight segment with 6 possible positions adjusted by screws in grade 5 titanium
• Ceramic ball bearings
• Unidirectional; anti-clockwise winding direction

This exclusive Richard Mille design makes it possible to effectively adapt rewinding of the mainspring to the user’s activity level, in sporting or non-sporting environments. By adjusting the six-position rib, the rotor’s inertia is modified to either speed up the winding process in the case of leisurely arm movements, or to slow it down during sporting activities.

MOVEMENT CHARACTERISTICS

Movement dimensions: 30.25 x 28.45 mm
Thickness: 4.14 mm
Number of jewels: 32
Barrel arbour: AP 20 steel
Balance: Glucydur®, 4 arms, moment of inertia 4.8 mg•cm2, angle of lift 53°
Frequency: 28,800 vph (4 Hz)
Balance spring: elinvar by Nivarox®
Shock protection: INCABLOC 908.22.211.100 (transparent)
Escapement wheel jewels: Rubifix (transparent)
Three-position stem: manual winding, date adjustment, time setting

CASE

The watch is water resistant to 30 atmospheres (300 metres) per ISO 6425 diver’s watch norms.
This is achieved with a unique, curved, tripartite case design using torque screws that can be individually and precisely tensioned with high accuracy around the exterior circumference of the case. This is complemented by a screw-lock crown construction.

BEZEL

This component is constructed of three layers connected with 22 screws, turning unidirectionally per ISO 6425 norms to avoid timing miscalculations.
The use of an additional screwed system attaching the bezel to the watchcase makes it absolutely stable, as well as impossible to inadvertently dislocate or loosen. In addition, the use of screws makes perfect adjustment possible, since the bezel is not tensioned into position.
For clearer visibility under murky conditions, starting at 12 o’clock, the five-minute markers of the first quarter are highlighted in red.

ALL INFORMATION PROVIDED FROM THE RICHARD MILLE WEBSIDE

Show more

Show less

Description and technical specs

Codice W5859
Referenza RM 028
Carica Automatica
Materiale della cassa Titanio
Materiale Cinturino Gomma
Condizione Nuovo
Con Scatola
Garanzia Si
Anno No
Colore Cinturino No
Chiusura No
Materiale Chiusura No
Impermeabile No
Vetro No
Quadrante No
Quadrante a Numeri No
Materiale Lunetta No
Calibratura/Meccanismo No
Calibro di Base No
Funzioni No
Altro No
Diametro Modello No
Sesso UOMO /UNISEX

Description and technical specs

INTRODUCTION DEVELOPMENT GUIDED BY EXTREME SUBMARINE CONDITIONS We created the RM 025 because we wanted to tackle the circle in all its roundness, and its creation supplied us with the technical foundation for developing the automatic movement of the RM 028. Cased in a slightly smaller diameter of 47 mm, this creation has all the hallmarks of its uncompromising character. Following the direction set out by the first diver’s watch created by Richard Mille, the RM 025, the RM 028 uses a number of key elements that demarcate the theme of diving within the collection. Its exceptional tripartite case with a unidirectional bezel and water resistance to 300 metres follows ISO diver’s watch norm 6425, creating a perfect environment to house the skeletonised movement with variable rotor geometry, a Richard Mille exclusive. IMMERSION We created the RM 025 because we wanted to tackle the circle in all its roundness, and its creation supplied us with the technical foundation for developing the automatic movement of the RM 028 RM 028 AUTOMATIC WINDING DIVER'S WATCH CALIBRE RMAS7 Automatic winding movement with hours, minutes, central seconds, date and variable-geometry rotor. POWER RESERVE Circa 55 hours (± 10%). BASEPLATE AND BRIDGES MADE OF GRADE 5 TITANIUM Production of these components in grade 5 titanium with black PVD or Titalyt® coating confers great rigidity to the entire assembly, as well as precise the surface flatness essential for perfect functioning of the gear train. The baseplate and bridges were subjected to separate and extensive validation tests to ensure it met optimal strength requirements. DATE DISPLAY Semi-instantaneous, the calendar disc of sapphire crystal is treated with non-reflective coating on both sides. VARIABLE-GEOMETRY ROTOR The Richard Mille RM 028 uses variable geometry to optimise the rotor’s winding motion. Rotor specifications • Arm in grade 5 titanium • High palladium content 18K white gold weight segments • Weight segment with 6 possible positions adjusted by screws in grade 5 titanium • Ceramic ball bearings • Unidirectional; anti-clockwise winding direction This exclusive Richard Mille design makes it possible to effectively adapt rewinding of the mainspring to the user’s activity level, in sporting or non-sporting environments. By adjusting the six-position rib, the rotor’s inertia is modified to either speed up the winding process in the case of leisurely arm movements, or to slow it down during sporting activities. MOVEMENT CHARACTERISTICS Movement dimensions: 30.25 x 28.45 mm Thickness: 4.14 mm Number of jewels: 32 Barrel arbour: AP 20 steel Balance: Glucydur®, 4 arms, moment of inertia 4.8 mg•cm2, angle of lift 53° Frequency: 28,800 vph (4 Hz) Balance spring: elinvar by Nivarox® Shock protection: INCABLOC 908.22.211.100 (transparent) Escapement wheel jewels: Rubifix (transparent) Three-position stem: manual winding, date adjustment, time setting CASE The watch is water resistant to 30 atmospheres (300 metres) per ISO 6425 diver’s watch norms. This is achieved with a unique, curved, tripartite case design using torque screws that can be individually and precisely tensioned with high accuracy around the exterior circumference of the case. This is complemented by a screw-lock crown construction. BEZEL This component is constructed of three layers connected with 22 screws, turning unidirectionally per ISO 6425 norms to avoid timing miscalculations. The use of an additional screwed system attaching the bezel to the watchcase makes it absolutely stable, as well as impossible to inadvertently dislocate or loosen. In addition, the use of screws makes perfect adjustment possible, since the bezel is not tensioned into position. For clearer visibility under murky conditions, starting at 12 o’clock, the five-minute markers of the first quarter are highlighted in red. ALL INFORMATION PROVIDED FROM THE RICHARD MILLE WEBSIDE